Printer Settings Report Printer Settings Printer Maintenance System Settings | Parallel Settings | Network Settings | USB Settings | PCL Settings | PS Settings Secure Settings | Copy Defaults | Copy Color Balance | Copy Settings | Scan Defaults | Fax Defaults | Fax Settings System Settings Power Saver Mode 2 Enable Power Saver Timer Mode 1 minutes (5 - 60) Power Saver Timer Mode 2 minutes (1 - 6) Auto Reset *45 seconds 1 minute 2 minutes 3 minutes 4 minutes Panel Select Tone Soft Normal Loud*Off Panel Alert Tone Soft Normal Loud*Off Machine Ready Tone Soft*Normal Loud Off Copy Job Tone Soft*Normal Loud Off Non-Copy Job Tone Soft*Normal Loud Off Fault Tone Soft*Normal Loud Off Alert Tone Soft*Normal Loud Off Out of Paper Tone Soft*Normal Loud Off Low Toner Tone Soft*Normal Loud Off Auto Clear Alert Tone Soft Normal Loud*Off Base Tone Soft Normal Loud*Off All Tones Soft Normal Loud Off*(not selected) Time-Out seconds(0:Off, 5 - 300) Panel Language *English French Italian German Spanish Dutch Danish Norwegian Swedish Auto Log Print On Print ID *Off Top Left Top Right Bottom Left Bottom Right Print Text On Banner Sheet Insert Position *Off Front Back Front & Back Banner Sheet Specify Tray *Tray 1 Tray 2 MPF RAM Disk Enable Substitute Tray *Off Larger Size Nearest Size MPF Feed mm / inch *millimeter (mm) inch (") Fax Activity *Auto Print No Auto Print Fax Transmit *Print Always Print at error Not Print Fax Broadcast *Print Always Print at error Not Print Protocol Monitor Print Always Print at error*Not Print